part no. ecn # rev -a revisions description drawn date date date checkd apprvd 10/2/11 arun 10/2/11 24/2/11 jagan farnell released MCSD75-330KU this data sheet and its contents (the "information") belong to the premier farnell group (the "group") or are licensed to it. no licence is granted for the use of it other than for information purposes in connection with the products to which it relates. no licence of any intellectual property rights is granted. the information is subject to change with- out notice and replaces all data sheets previously supplied. the information supplied is believed to be accurate but the group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. users of this data sheet should check for themselves the information and the suitability of the prod- ucts for their purpose and not make any assumptions based on information included or omitted. liability for loss or damage resulting from any reliance on the information or use of it (including liability resulting from negligence or where the group was aware of the possibility of such loss or damage arising) is excluded. this will not operate to limit or restrict the group's liability for death or personal injury resulting from its negligence. spc multicomp is the registered trademark of the group. ? premier farnell plc 2011. tolerances: drawn by: arun jagan farnell checked by: approved by: date: drawing title: inductor sd75-330ku m10003025 10/02/11 date: size scale: nts u.o.m.: mm sheet: 1 of 3 dwg no. electronic file rev a 10/02/11 a date: 24/02/11 unless otherwise specified, dimensions are for reference purposes only. configurations and dimensions a 7 0.3 mm - b 7.8 0.3 mm - c 5 0.5 mm - d 3 mm (reference) e 8 0.5 mm - test condition 100khz 0.25v l 33 h 10% at 25c dcr 130m ? (maximum) 100khz 0.25v i rms = 1.20a ? t temperature rise 40c (maximum) dimensions : millimetres electrical characteristics (at 25c) operating temperature : -55c to +130c marking : 330 schematic diagram note: (1) wire ?0.35mm x 1p 2uewf 155c (2) 30.5ts (reference) test item a mm b mm c mm d mm e mm specification 7 0.3 7.8 0.3 5 0.5 3 (reference) 8 0.5 1 7.05 7.82 4.99 2.26 7.79 2 7.06 5.05 2.25 7.75 3 7.08 7.84 5.06 2.28 7.81 4 7.04 7.81 5.01 2.23 7.79 5 7.09 7.85 5.07 2.27 average 7.06 7.83 5.04 2.26 7.79 test data for mechanical free datasheet http://www.datasheet-pdf.com/
part no. ecn # rev -a revisions description drawn date date date checkd apprvd 10/2/11 arun 10/2/11 24/2/11 jagan farnell released MCSD75-330KU this data sheet and its contents (the "information") belong to the premier farnell group (the "group") or are licensed to it. no licence is granted for the use of it other than for information purposes in connection with the products to which it relates. no licence of any intellectual property rights is granted. the information is subject to change with- out notice and replaces all data sheets previously supplied. the information supplied is believed to be accurate but the group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. users of this data sheet should check for themselves the information and the suitability of the prod- ucts for their purpose and not make any assumptions based on information included or omitted. liability for loss or damage resulting from any reliance on the information or use of it (including liability resulting from negligence or where the group was aware of the possibility of such loss or damage arising) is excluded. this will not operate to limit or restrict the group's liability for death or personal injury resulting from its negligence. spc multicomp is the registered trademark of the group. ? premier farnell plc 2011. tolerances: drawn by: arun jagan farnell checked by: approved by: date: drawing title: inductor sd75-330ku m10003025 10/02/11 date: size scale: nts u.o.m.: mm sheet: 2 of 3 dwg no. electronic file rev a 10/02/11 a date: 24/02/11 unless otherwise specified, dimensions are for reference purposes only. test item l h dcr m ? ? ? ? t condition 100khz 0.25v at 25c 100khz 0.25v i rms = 1.20a specification 33 10% 130 (maximum) temperature rise 40c (maximum) 1 32.13 89.5 ok 2 31.93 88.6 ok 3 31.95 91.8 ok 4 31.82 87.2 ok 5 31.78 87 ok average 31.92 88.82 ok test data for electrical electric characteristics free datasheet http://www.datasheet-pdf.com/
|
